Operation Panel - Kyocera KM-2530 Operation Manual

• Operation panel

1 Default ( ) key
Press this key when you want to change default settings
for the scanner as well as register new users.
2 Reset key
Press this key when you want to cancel default and scan
settings, as well as when you want to clear selected
destination folders and computers.
3 Start key
Press this key when you want to start, or continue,
scanning originals.
4 Keypad
Use these keys when you want to enter a desired value
for one of the various settings.
5 Touch panel
Indicates machine status and the values for each setting,
and contains operational key. The keys which appear on
the touch panel for operation procedures are indicated in
this Operation Guide within double quotation marks and
you will be instructed to "touch" them rather than "press"
them. (Ex.: Touch the "xxx" key.)
6 Scanner key / Scanner indicator
Press this key when the optional Network Scanner Kit is
installed in your machine and you want to switch to the
Scanner Operation mode. The Scanner indicator is lit
when the machine is in the Scanner Operation mode.
Printer Priority
• The touch panel in the Scanner Operation mode
7 "Send E-mail" key
Touch this key when you want to send scanned image
data as an attached file in an email message.
8 "Scan to PC" key
Touch this key when you want to save scanned image
data as a file on your computer.
9 "TWAIN" key
When initiating the scanning operation from a TWAIN-
compatible application, touch this key to enter the TWAIN
mode and then set the original, and the connection from
the application will be carried out more surely.
0 "Edit add. book" key
Touch this key when you want to edit the shared address
book as well as change user information.
! "History of Sending" key
Touch this key when you want to view the transmission
log for the data scanned with "send E-mail" funciton and
"Scan to PC" function.
1. Preparations
1-2