13.4.10 Default Operation Selection - Konica Minolta bizhub 223 User Manual

13.4 Administrator Settings
5
Press the desired button.

13.4.10 Default Operation Selection

Configure the default setting of the operation to be performed after authentication has been completed on
the authentication unit (success in login) while this machine is holding ID & print jobs. (Default: [Begin Print-
ing])
- [Begin Printing]: Select this option to print an ID & print job simultaneously with authentication. This op-
tion is convenient when there are many ID & print users.
However, when using the copy or scan function on the control panel, select [Print & Access] or [Access]
before authentication.
- [Print & Access]: Select this option to print an ID & print job simultaneously with authentication, and log
in to the basic page. When using only the ID & print function, select [Begin Printing] before authentica-
tion.
- [Access]: Click this option to log in to the basic page. ID & print jobs are not executed. This option is
convenient when there are few ID & print users. When using only the ID & Print function, select [Begin
Printing] before authentication.
Reference
- This function can be specified only when a Hard Disk is installed.
1
In the Administrator Settings screen, press [User Authentication/Account Track].
% For details on displaying the Administrator Settings screen, refer to page 13-35.
2
In the User Authentication/Account Track screen, press [User Authentication Settings].
3
In the User Authentication Settings screen, press [Administrative Setting].
4
In the Administrative Setting screen, press [Default Operation Selection].
bizhub 423/363/283/223
13
13-46