Konica Minolta bizhub 223 User Manual page 112

9.4 Parameter details
When [Print Device Image] is selected:
You can specify the overlay printing conditions by specifying the overlay registered in the machine.
Function Name
[Obtain Device Information]
[Overlay Info]
[Print on Front Side]/[Print
on Back Side]
[Overlay Name]
[Browse...]
[Density]
[Overwrite]
[Same as Front Side]
[Pages]
Reference
- [Print Device Image] of the [Overlay] function is available only for the PCL driver.
- [Print Device Image] of the [Overlay] function is available only when a Hard Disk is installed.
- The function of [Acquire Device Information] is available only when your computer is connected to and
can communicate with the machine. To use [Acquire Device Information], in [Administrator Settings] of
this machine, set [System Connection] - [OpenAPI Settings] - [Authentication] to [OFF]. For details, refer
to page 13-52.
bizhub 423/363/283/223
Description
Select this option to communicate with the machine to read the overlay
settings configured on the machine.
Displays the information of the selected overlay.
Select the check box to specify whether printing is done or not for each of
the front side/back side.
Select the overlay name registered in the machine.
Click this button to display the detailed information of the selected over-
lay.
Select the overlay printing density.
Specify the sequence for printing the overlay on top of the original.
Clear this check box to specify the same value for both the front and back
sides.
Specify the pages to be printed.
9
9-21