Finish] Tab - Konica Minolta bizhub 223 User Manual

9.4 Parameter details
Function Name
[Binding Margin
Settings...]
[Image Shift]
[Image Shift Set-
tings...]
Reference
- The options "2 e 2, 3 e 3 and 4 e 4" for [Combination], which are for printing a sheet of original onto
multiple sheets of paper, are available only for the PCL driver.
- The [Skip Blank Pages] function is available for the PCL/XPS drivers.
- The positions of binding margins vary according to the [Binding Position] setting.
9.4.4

[Finish] tab

Function Name
[Staple]
[Center Staple
and Fold]
[Punch]
[Fold]
bizhub 423/363/283/223
Option
[Shift Mode]
[Front Side]/[Back Side]
[Unit]
ON/OFF
[Unit]
[Front Side]/[Back Side]
Option
ON/OFF, Left Cor-
ner/Right Corner/2 Posi-
tion (Left)/2 Position
(Right)/2 Position (Top)
ON/OFF
ON/OFF, 2-Hole (Left)/2-
Hole (Right)/2-Hole
(Top)/3-Hole (Left)/3-
Hole (Right)/3-Hole
(Top)/4-Hole (Left)/4-
Hole (Right)/4-Hole (Top)
ON/OFF, [Half-Fold]
Description
Select how to process the image to prepare the page
margin.
Specify the binding margin values. For 2-sided printing,
clearing the [Same value for front and back sides]
check box allows you to specify different values for the
front and back sides.
Select a unit to be used for specifying the size.
Select this check box to print by shifting the entire print
image. Click [Image Shift Settings...] to specify the im-
age shift values.
Select a unit to be used for specifying the size.
Specify the shift direction and values. For 2-sided print-
ing, clearing the [Same value for Front and Back sides]
check box allows you to specify different values for the
front and back sides.
Description
Select this check box to specify stapling.
From the drop-down list, specify the number of staples
and the stapling position.
Select this check box to specify center staple and fold.
Select this check box to specify hole punching.
From the drop-down list, specify the number of punch-
es and the punching position.
Select this check box to specify folding.
From the drop-down list, specify the folding condition.
9
9-15