13.2.21 Cr/Lf Mapping - Konica Minolta bizhub 223 User Manual

13.2 User settings
4
Press the C key to clear the value, and then use the keypad to enter the number of lines. (5 lines to 128
lines)
% If a value outside of the allowable range is specified, the message "Input error" appears. Enter a
number within the allowable range.
5
Press [OK].
The number of lines is set.

13.2.21 CR/LF Mapping

Specify the CR/LF substitution method when printing text data. (Default: [No])
- [Mode 1]: Select this option to substitute CR with CR-LF.
- [Mode 2]: Select this option to substitute LF with CR-LF.
- [Mode 3]: Select this option to substitute with CR-LF.
- [No]: Select this option not to perform substitution.
1
In the User Settings screen, press [Printer Settings].
% For details on displaying the User Settings screen, refer to page 13-2.
2
Press [PCL Settings].
3
Press [CR/LF Mapping].
bizhub 423/363/283/223
13
13-24