Konica Minolta bizhub 223 User Manual page 132

10.5 Parameter details
Function Name
[Image Shift]
[Chapters]
[Staple:]
[Punch:]
[Fold & Staple:]
[Paper Arrange-
ment:]
Reference
- The [Staple:] function is available only if the optional Finisher FS-527 or Finisher FS-529 is installed.
- The [Punch:] function is available only when the Punch Kit is installed on the optional Finisher FS-527.
- The [Fold & Staple:] function is available only when the Saddle Stitcher is installed on the optional Fin-
isher FS-527.
- If multiple pages are printed while [Half-Fold] is specified for the [Fold & Staple:] function, the finishing
unit varies depending on the setting of [Half-Fold Specification] in [Copier Settings] of [User Settings]
on the control panel. If [Half-Fold Specification] is set to [One Sheet at a Time], paper is folded by sheet.
If it is set to [Multiple Sheets], all sheets are folded collectively for each job even if the original consists
of multiple pages.
However, if the number of original pages is greater than the number of sheets this machine can fold,
the setting of the [Fold & Staple:] function is disabled automatically, and sheets are not folded for print-
ing.
If [Half-Fold] is selected along with [Booklet], all sheets are half-folded collectively even if [One Sheet at
a Time] is specified. For details, refer to page 13-34.
bizhub 423/363/283/223
Option
ON/OFF
[Front Side]/[Back Side]
ON/OFF
[Page Number:]
ON/OFF
ON/OFF
OFF, [Center Staple and
Fold], [Half-Fold]
[Prioritize Arranging Pa-
pers]/[Prioritize Produc-
tivity]
Description
Select this check box to print by shifting the entire print
image. In the window that appears when this option is
selected, detailed amount of shift can be specified.
Specify the shift direction and values. For 2-sided print-
ing, clearing the [Same value for Front and Back sides]
check box allows you to specify different values for the
front and back sides.
Select this check box to specify the page to be printed
on the front side. In the window that appears when this
option is selected, the page can be specified.
It can be specified when Print Type is [2-Sided] or
[Booklet].
Specify the pages to be printed on the front side when
[Chapters] is selected.
Select this check box to specify stapling.
From the drop-down list, specify the number of staples
and the stapling position.
Select this check box to specify hole punching.
From the drop-down list, specify the number of punch-
es.
Specify the fold and staple.
Specify the method for paper arrangement (adjusting
the binding position) for 2-sided printing. When [Priori-
tize Arranging Papers] is selected, the paper arrange-
ment process is performed after receiving all data.
When [Prioritize Productivity] is selected, the paper ar-
rangement process is performed while receiving and
printing data.
10
10-15