Closed Network Rx; Forward Tx Setting - Konica Minolta bizhub 223 User Manual

10.4 Administrator Settings (G3)

Closed Network RX

Specify whether to use the Closed Network RX function. To use the function, specify a password that is used
for Closed Network RX.
Press [No] to clear the entered setting and then specify a password using the keypad. (up to 4 digits)
Reference
- Closed Network RX is only available when the receiver has password transmission function.

Forward TX Setting

You can forward received documents to a preset recipient.
To receive data with the G3 fax function, if two units of Fax Kit FK-508 are installed, and [Individual Receiving
Line Setup] is set to [ON] in Administrator Settings, you can select either [Fax Line 1] or [Fax Line 2] to specify
the forward destination setting for each receiving line. For details on [Individual Receiving Line Setup], refer
to page 10-19.
Item
[Output Method]
[Forward Dest.]
[Select Line]
The following items are not available if Forward TX Setting is configured.
- PC-Fax RX Settings
- TSI User Box Settings
- Memory RX Setting
bizhub 423/363/283/223
Description
[Forward & Print]: Received document are forwarded and printed on this ma-
chine.
[Forward & Print (If TX Fails)]: Received documents are forwarded and, if for-
warding fails, are printed on the machine.
Allows you to enter a fax number using up to 38 digits. It is also possible to
select it from the address book.
If two units of Fax Kit FK-508 are installed, specify the line used to forward
received faxes.
10
10-24