Eclipse CD8053 Owner's Manual page 90

How to operate the Sound Adjustment Mode
5 Press the [SEEK
This adjusts the frequency level.
[SEEK
[FAST
6 Press the [6] button to select the Q curve pattern.
Each time the button is pressed, the Q curve changes in
the following order.
NORMAL
Repeat the operations in steps
7
settings for each channel and band.
The frequencies that have been adjusted for either the
channel or band cannot be selected.
Hold down a button, [1] to [5], for more than two
8
seconds to preset a value.
The preset value is overwritten by the value set using the
above steps.
The time alignment and crossover adjustments will also be
stored at this time.
9 Press the [RTN] button.
At this time, other adjustments can also be made in pro
mode.
Press the [SOUND] button for less than one second to
10
exit sound adjustment mode.
When updating software, press the [DISP] button to measure and
display the frequency characteristics.
ATTENTION
Buttons [1] to [6]
/FAST
] button: Increases level.
] button: Decreases level.
SHARP
90
[SOUND] button [DISP] button
[RTN] button
[FAST
] button.
SLOW
to to change the
3 6
[SEEK ]
button
] button