Eclipse CD8053 Owner's Manual page 80

How to operate the Sound Adjustment Mode
Position selector setting (Position)
When the position of the listener's seat is selected, the time
taken for the sound to travel from the speakers to the listener
can then be adjusted in order to obtain a more natural sound
orientation. This unit allows up to four different positions to be
set.
1 Turn the [SEL] button to select Position.
The selected item will be highlighted.
Press the [SEL] button.
2
The mode will change to position selector setting mode.
Turn the [SEL] button to select the setting item.
3
When the button is turned, the setting item changes in the
following order and the selected item is highlighted.
OFF
Press the [RTN] button.
4
Other time alignment items can be set at this time.
Press the [RTN] button.
5
At this time, other adjustments can also be made in normal
mode.
Press the [SOUND] button for less than one second to
6
exit sound adjustment mode.
If the position selector has been set (to a setting other than OFF),
the BAL (balance) and FAD (fader) settings will be canceled.
ATTENTION
Front L Front R
80
[SOUND] button
[SEL]
button
[RTN] button
Front Rear