Buttons [1] to [5]
Displaying a memo
If memos have been set, a memo recorded corresponding to a
number button [1] to [5] appears on the screen when the
number button is pressed briefly while the power of the main
unit is turned off.
Setting a memo
Press and hold any number button for more than two
1
seconds while in the Standby mode.
The state shifts to the MEMO setting mode.
Press the [SEEK
2
Pressing the button will switch types from [ABC] (alphabet
characters) to [123] (numeric characters) and then [!&?]
(symbols).
3
Press either [SEL] or [FAST
position in which to enter the character.
The character will be inserted where the cursor is flashing:
[SEL] button:
[FAST
] button: Advances the cursor to the left.
] button to select the character type.
] button to select the
Moves the cursor to the right.
35
Basic operation
[SEEK
] button
[SEL]
button
[FAST
] button