Brother MFC-P2000 - B/W Laser Printer Service Manual page 162

Note
If the machine does not operate as you expect it to, it is recommended that you turn off the
power switch, wait a few seconds and then turn it on again. If you still have problems, consult
your dealer or our authorized service representative.
Operator Calls for Copying and Scanning Functions
If a recoverable error occurs, the machine shows "E" on the display.
To clear the error, press the Stop Button.
When there is no document in the feeder, inserting a document in the document feeder clears
the error.
Errors occur when the following happens;
* When the document causes a paper jam in the document feeder while the mahine is feeding
the document.
* When the machine is busy. (When the machine is being used as a scanner.)
* When there is no paper in the sheet feeder.
*When memory full happens. (The mahine will prints out an error message.)
Service Calls for the Printing Function
If an unrecoverable error occurs, the machine indicates the need for a service call by lighting
all the lamps and then the following combination of lamps alternately:
Service Call Fuser
malfunction
Drum
Alarm
Ready
Data
Service Call
Drum
Alarm
Ready
Data
Service Call Service E1
Drum
Alarm
Ready
Data
Laser BD
malfunction
Service A Service B
Service P
Scanner ROM
malfunction error
Service C Service D
NV-RAM CPU runtime
error error
- 33 -
D-RAM
error
Service E0
OFF
ON