3.11
Base Plate ASSY
Caution:
Prior to turning the printer upside-down, ensure that the drum unit has been removed
from the printer.
(1)
Turn the printer upside down.
(2)
Remove the eight M4 and five M3 self tapping screws.
Taptite, bind M4x12
Taptite, cup M3x6
Taptite, bind M4x12
Base plate ASSY
Taptite, bind M4x12
(3)
Lift the
Fig. 3-29
base plate
ASSY and remove the grounding screw.
Fig. 3-30
Taptite, cup M3x6
Base Plate ASSY
Ground wire
III-19
Taptite, bind M4x12
Screw pan(washer),
M3.5x6
Low-voltage Power
Supply PCB ASSY