Laser Unit - Brother MFC-P2000 - B/W Laser Printer Service Manual

3.9

Laser Unit

(1) Remove the three M4x12 tapping screws.
(2) Lift out the
Taptite, bind M4x12
Laser Unit
Main cover
Note:
When replacing the laser unit, be sure to assemble the ferrite core using the cable binder
as follows;
Cable binder
(3) Disconnect the three connectors from the panel sensor PCB.
(4) Remove the M3x8 tapping screw, and lift the
laser unit.
Fig. 3-25
LD harness
Fig. 3-26
III-17
Taptite, bind M4x12
Panel Sensor PCB
Ferrite Core
Flat cable
toner sensor PCB from the laser unit.