Copying Function - Brother MFC-P2000 - B/W Laser Printer Service Manual

COPYING FUNCTION

The machine allows you to make high-quality photocopies. Always make sure that paper is
loaded in the Sheet Feeder before making copies.
This section refers to the following lamps and switch on the machine control panel.
Copying in Standard Mode
1. Insert the original document face down in the Document Feeder.
2. Press the Copy button.
To stop copying, press the Stop button. The machie shows "E" on the display. Press
the Stop button again to eject the original document.
To Make Settings for Each Copy
You can make various settings. These settings are effective only for the next copy
and after that the settings are cleared. The number of copies should be set after
Enlarge/Reduce and Quality settings.

 Enlarge/Reduce - Enlargement / Reduction ratio

 Photo/Text -Copy output mode

 Copies - the number of copies
150%
120%
LGL >LTR
Enlarge/
78%
Reduce
50%
Photo
A6 @A4
A5 @A4
Enlarge/
A4 @A5
Reduce
A4 @A6
Photo
- 19 -
Copy
Stop
Copy
HL-P2000
Print Copy Scan
Copy
Stop
Copy