Display Assembly - HP 2730p - EliteBook - Core 2 Duo 1.86 GHz Maintenance And Service Manual

Display assembly

✎
The display assembly spare part kit includes an ambient light sensor, fingerprint reader, logo, 2 microphones,
nameplate, 2 WLAN antenna transceivers and cables, and 2 WWAN antenna transceivers and cables.
Description
12.1-inch, WXGA LED display assembly with webcam and outdoor light
12.1-inch, WXGA LED display assembly with webcam
12.1-inch, WXGA LED display assembly with outdoor light
12.1-inch, WXGA LED display assembly
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. SIM (see
b. Hard drive cover (see
c. Keyboard (see
d. Hinge cover (see
e. Top cover (see
Maintenance and Service Guide
"Battery" on page
"SIM" on page 4-9)
"Hard drive" on page
"Keyboard" on page
"Hinge cover" on page
"Top cover" on page
4-8).
4-10)
4-17)
4-20)
4-21)
Removal and replacement procedures
Spare part number
504172-001
504170-001
504171-001
504169-001
4–27