HP 2730p - EliteBook - Core 2 Duo 1.86 GHz Maintenance And Service Manual page 64

Removal and replacement procedures
Remove the display assembly:
1. Open the computer as far as possible.
2. Disconnect the following cables from the system board and remove the cables from the clips built into the
system board shielding:
Fingerprint reader board cable
Webcam cable
Microphone cable
3. Remove the wireless antenna cables
board shielding.
4. Remove the two Phillips PM2.0×4.0 screws
5. Disconnect the display panel cable
6. Remove the Phillips PM2.0×4.0 screw
7. Disconnect the display converter cable
4–28
from the opening in the system board and the clips built into the system
that secure the display panel cable to the system board.
from the system board.
that secures the display converter cable to the system board.
from the system board.
Maintenance and Service Guide