HP 2730p - EliteBook - Core 2 Duo 1.86 GHz Maintenance And Service Manual page 55

2. Turn the computer display-side up, with the front toward you.
3. Open the computer as far as possible.
4. Lift the rear edge of the keyboard
5. Release the zero insertion force (ZIF) connector
the pointing stick cable
6. Swing the top edge of the keyboard
7. Release the ZIF connector
from the system board.
8. Remove the keyboard.
Reverse this procedure to install the keyboard.
Maintenance and Service Guide
and slide it
from the system board.
up and forward until it rests upside down on the palm rest.
to which the keyboard cable is attached, and disconnect the keyboard cable
back until the pointing stick cable is accessible.
to which the pointing stick cable is attached, and disconnect
Removal and replacement procedures
4–19