Port Mirroring; Multiple Port Mirroring - NETGEAR GS748Tv4 Software Administration Manual

GS748T Smart Switch Software Administration Manual
Use the buttons at the bottom of the page to perform the following actions:
• Click Clear to clear the messages out of the Event Log.
• Click Refresh to refresh the data on the screen and display the most current information.

Port Mirroring

The page under the Mirroring link allows you to view and configure port mirroring on the
system.

Multiple Port Mirroring

Port mirroring selects the network traffic for analysis by a network analyzer. This is done for
specific ports of the switch. As such, many switch ports are configured as source ports and
one switch port is configured as a destination port. You have the ability to configure how
traffic is mirrored on a source port. Packets that are received on the source port, that are
transmitted on a port, or are both received and transmitted, can be mirrored to the destination
port.
The packet that is copied to the destination port is in the same format as the original packet
on the wire. This means that if the mirror is copying a received packet, the copied packet is
VLAN tagged or untagged as it was received on the source port. If the mirror is copying a
transmitted packet, the copied packet is VLAN tagged or untagged as it is being transmitted
on the source port.
Use the Multiple Port Mirroring page to define port mirroring sessions.
Chapter 6: Monitoring the System | 219