GS748T Smart Switch Software Administration Manual
Switch Management Interface
The NETGEAR GS748T Smart Switch contains an embedded Web server and management
software for managing and monitoring switch functions. The GS748T functions as a simple
switch without the management software. However, you can use the management software
to configure more advanced features that can improve switch efficiency and overall network
performance.
Web-based management lets you monitor, configure, and control your switch remotely using
a standard Web browser instead of using expensive and complicated SNMP software
products. From your Web browser, you can monitor the performance of your switch and
optimize its configuration for your network. You can configure all switch features, such as
VLANs, QoS, and ACLs by using the Web-based management interface.
NETGEAR provides the Smart Control Center utility with this product. This program runs
®
under Microsoft
Windows
that discovers the switches on your network segment (L2 broadcast domain). When you
power up your switch for the first time, use the Smart Control Center to discover the switch
and view the network information that has been automatically assigned to the switch by a
DHCP server; or, if no DHCP server is present on the network, use the Smart Control Center
to discover the switch and assign static network information.
In addition to enabling NETGEAR switch discovery, the Smart Control Center provides
several utilities to help you maintain the NETGEAR switches on your network, such as
password management, firmware upgrade, and configuration file backup. For more
information, see
Smart Control Center Utilities
®
XP, Windows 2000, or Windows Vista
on page 19.
®
and provides a front end
Chapter 1: Getting Started
| 11