Interface Configuration - Dell PowerConnect 6224 User Manual

IP Address — The (first) network-layer address that is reported in the Address TLV of the most
•
recently received ISDP message.
Version — Displays the Version string for the neighbor.
•
• Holdtime — Displays the ISDP holdtime for the neighbor.
• Capability — Displays the ISDP Functional Capabilities for the neighbor.
• Platform — Displays the ISDP Hardware Platform for the neighbor.
Port ID — Displays the ISDP port ID string for the neighbor.
•
• Protocol Version — Displays the ISDP Protocol Version for the neighbor.
• Last Time Changed — Displays when entry was last modified.
Viewing ISDP Cache Table Information CLI Commands
For information about the CLI commands that perform this function, see the CDP Interoperability
Commands chapter in the
commands you use to view and configure ISDP .
Table 6-68. ISDP Cache Commands
CLI Command
clear isdp table
show isdp entry
show isdp neighbors

Interface Configuration

From the ISDP Interface Configuration page, you can configure the ISDP settings for each interface.
If ISDP is enabled on an interface, it must also be enabled globally in order for the interface to transmit
ISDP packets. If the ISDP mode on the ISDP Global Configuration page is disabled, the interface will
not transmit ISDP packets, regardless of the mode configured on the interface.
To access the ISDP Interface Configuration page, click System → ISDP → Interface Configuration in
the navigation tree.
282
Configuring System Information
CLI Reference Guide
. The following table summarizes the equivalent CLI
Description
Clears entries in the ISDP table.
Displays ISDP entries.
Displays the list of neighboring devices.