Cache Table - Dell PowerConnect 6224 User Manual

other — Indicates that the value is in the form of a platform specific ASCII string containing info
–
that identifies the device. For example: ASCII string contains serialNumber appended/prepended
with system name.
Configuring ISDP Using CLI Commands
For information about the CLI commands that perform this function, see the CDP Interoperability
Commands chapter in the
commands you use to configure ISDP.
Table 6-67. ISDP Commands
CLI Command
isdp advertise-v2
isdp enable
isdp holdtime
isdp timer
show isdp

Cache Table

From the ISDP Cache Table page, you can view information about other devices the switch has
discovered through the ISDP.
To access the ISDP Cache Table page, click System → ISDP → Cache Table in the navigation tree.
Figure 6-130. ISDP Cache Table
The ISDP Cache Table page contain the following fields:
• Device ID — Displays the string with Device ID which is reported in the most recent ISDP message.
Interface — Displays the interface that this neighbor is attached to.
•
CLI Reference Guide
. The following table summarizes the equivalent CLI
Description
Enables the sending of ISDP version 2 packets from the device.
Enables ISDP on the switch.
Configures the hold time for ISDP packets that the switch transmits.
Sets period of time between sending new ISDP packets.
Displays global ISDP settings.
Configuring System Information
281