Dell PowerConnect 6224 User Manual page 168

The following example shows an entry in the FreeRADIUS /etc/raddb/users file that allows a
admin
user (name: ) to log onto the switch with read/write privileges, which is equivalent to privilege level
15.
admin
enable
The values for the Service-Type attribute are as follows:
• NAS-Prompt-User indicates the user should be provided a command prompt on the NAS, from
which nonprivileged commands can be executed.
• Administrative-User indicates the user should be granted access to the administrative
interface to the NAS, from which privileged commands can be executed.
Applying an Authentication Method List to Console Sessions
1. Open the Select Authentication page.
2. Select an authentication profile in the Console field.
3. Click Apply Changes.
Console sessions are assigned an authentication method List.
Applying an Authentication Profile to Telnet Sessions
1. Open the Select Authentication page.
2. Select an authentication profile in the Telnet field.
3. Click Apply Changes.
Console sessions are assigned authentication profiles.
Applying an Authentication Profile to Secure Telnet (SSH) Sessions
1. Open the Select Authentication page.
2. Select an authentication profile in the Secure Telnet (SSH) field.
3. Click Apply Changes.
Secure Telnet (SSH) sessions are assigned authentication profiles.
Assigning HTTP Sessions an Authentication Sequence
1. Open the Select Authentication page.
168
Configuring System Information
Auth-Type := Local,
User-Password == "pass1234"
Service-Type = NAS-Prompt-User
Auth-Type := Local,
User-Password == "pass5678"
Service-Type = Administrative-User