Radius Server Configuration - Dell PowerConnect 6224 User Manual

Table 6-30. RADIUS Global Commands
CLI Command
radius-server attribute
radius-server retransmit
radius-server timeout
show radius-servers

RADIUS Server Configuration

From the RADIUS Server Configuration page, you can add a new RADIUS server, configure settings for
a new or existing RADIUS server, and view RADIUS server status information. The RADIUS client on
the switch supports up to 32 named authentication and accounting servers.
To access the RADIUS Server Configuration page, click System → Management Security → RADIUS
Server Configuration in the tree view.
Figure 6-54. RADIUS Server Configuration
The RADIUS Server Configuration page contains the following fields:
• RADIUS Server Host Address — Use the drop-down menu to select the IP address of the RADIUS
server to view or configure. Click Add to display the Add RADIUS Server page used to configure
additional RADIUS servers.
182
Configuring System Information
Description
Sets the network access server (NAS) IP address for the RADIUS
server.
Specifies the number of times the software searches the list of
RADIUS server hosts.
Sets the interval for which a switch waits for a server host to reply.
Displays the RADIUS server settings.