HP dx2810 - Microtower PC Service & Reference Manual page 84
Service reference guide: hp compaq dx2810 and dx2818 business pc and dx2810 small form factor business pc
Hide thumbs
Also See for dx2810 - Microtower PC:
- Hardware reference manual (57 pages) ,
- Quickspecs (39 pages) ,
- Product end-of-life disassembly instructions (8 pages)
Table of Contents
Advertisement
7.
Disconnect all cables from the system board.
8.
Remove the eight screws that secure the system board to the chassis.
9.
Slide the system board toward the front of the chassis, and then lift it up and out of the chassis.
NOTE:
To install the system board, reverse the removal procedure.
NOTE:
When replacing the system board, you must also change the chassis serial number in the
BIOS.
NOTE:
After installing a new system board, always update the system ROM to ensure that the latest
version of the BIOS is being used on the computer. The latest system ROM BIOS can be found at:
http:///support/files.
74
Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
The system board in the computer may look slightly different from the one shown here.
Advertisement
Table of Contents
