HP dx2810 - Microtower PC Service & Reference Manual page 113
Service reference guide: hp compaq dx2810 and dx2818 business pc and dx2810 small form factor business pc
Hide thumbs
Also See for dx2810 - Microtower PC:
- Hardware reference manual (57 pages) ,
- Quickspecs (39 pages) ,
- Product end-of-life disassembly instructions (8 pages)
Table of Contents
Advertisement
5.
Push in the latch holding the drive cage upright and lower the drive cage all the way down.
Figure 8-26
Lowering the Drive Cage
6.
Connect the power cable (1) and data cable (2) to the back of the hard drive.
Figure 8-27
Connecting the Hard Drive Cables
CAUTION:
Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A
sharp bend can break the internal wires.
7.
Replace the access panel and front bezel.
8.
Reconnect the power cord and any external devices, then turn on the computer.
9.
Lock any security devices that were disengaged when the access panel was removed.
NOTE:
If you are replacing the primary hard drive, use the Recovery Disc Set to restore the operating
system, software drivers, and any software applications that were preinstalled on the computer.
Drives 103
Advertisement
Table of Contents
