HP dx2810 - Microtower PC Service & Reference Manual page 117
Service reference guide: hp compaq dx2810 and dx2818 business pc and dx2810 small form factor business pc
Hide thumbs
Also See for dx2810 - Microtower PC:
- Hardware reference manual (57 pages) ,
- Quickspecs (39 pages) ,
- Product end-of-life disassembly instructions (8 pages)
Table of Contents
Advertisement
WARNING!
To reduce risk of personal injury from hot surfaces, allow the internal system
components to cool before touching.
5.
Open both latches of the memory module socket (1), and insert the memory module into the
socket (2).
Figure 8-30
Installing a DIMM
NOTE:
A memory module can be installed in only one way. Match the notch on the module with
the tab on the memory socket.
A DIMM must occupy the XMM1 socket. Always populate the white sockets before the black
sockets in each channel.
In order to create a dual-channel memory configuration, the memory capacity of Channel A must
equal the memory capacity of Channel B. Refer to
information.
6.
Push the DIMM module down firmly into the socket, ensuring that the module is fully inserted and
properly seated. The DIMM must be pushed all the way down into the socket and sit evenly in the
socket to avoid memory corruption. Make sure the latches are in the closed position (3).
7.
Repeat steps 5 and 6 to install any additional modules.
Populating DIMM Socketson page 105
for more
Memory 107
Advertisement
Table of Contents
