HP dx2810 - Microtower PC Service & Reference Manual page 130

Service reference guide: hp compaq dx2810 and dx2818 business pc and dx2810 small form factor business pc
Hide thumbs Also See for dx2810 - Microtower PC:
Table of Contents

Advertisement

7.
Remove the three screws that secure the power supply to the back of the chassis.
8.
Remove the screw that secures the power supply to the base of the computer.
9.
Slide the power supply about 1.25 cm (1/2-inch) toward the front of the chassis, rotate the power
supply toward the heatsink so it clears the lip at the top of the chassis, and then lift the power supply
out of the chassis.
To install the power supply, reverse the removal procedure.
120 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx2818 - microtower pcCompaq dx2810 microtowerCompaq dx2810 se microtowerCompaq dx2818 microtowerCompaq dx2810 sff

Table of Contents