Show Data Format; Resetting The Standard Product Defaults; Test Menu; Pqa (Print Quality Assessment) - Honeywell 4800dr - Document Camera Barcode Manual

Show Data Format

Scan the barcode below to show current data format settings.
Data Format Settings

Resetting the Standard Product Defaults

If you aren't sure what programming options are in your document reader, or you've changed some
options and want the standard product default settings restored, scan the Standard Product Default
Settings barcode below.
Standard Product Default Settings
The Menu Commands starting on page 10-4 lists the standard product default settings for each of the
commands (indicated by an asterisk (*) on the programming pages).

Test Menu

When you scan the Test Menu On code, then scan a programming code in this manual, the document
reader displays the content of a programming code. The programming function will still occur, but in
addition, the content of that programming code is output to the terminal.
Note: This feature should not be used during normal document reader operation.
On
* Off
2D PQA (Print Quality Assessment)
Two-dimensional Print Quality Assessment (2D PQA) is a feature of Honeywell image readers where the
data from the successful read of a 2D barcode symbol is augmented with lines of text that both identify
the symbol, and also report graded measurement parameters obtained from it.

2D PQA Reporting

Honeywell 2D PQA reporting can be enabled in two different modes: Full Report or Screening. (To see
displayed results, Microsoft® Notepad, a word processor/editing program, or Quick*View (page 9-4) is
recommended.)
If you are using Quick*View, you can enable Full Report, a listing of all of a symbol's identifying informa-
tion, measurements, and corresponding grades, by typing the following menu command:
2D_PQA1
9 - 2