Upc-A - Honeywell 4800dr - Document Camera Barcode Manual

UPC-A

UPC-A
* On
UPC-A Check Digit
This selection allows you to specify whether the check digit should be transmitted at the end of the
scanned data or not. Default = On .
* On
UPC-A Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the beginning of the scanned
data, but the unit can be programmed so it will not transmit it. Default = On.
* On
<Default All UPC-A Settings>
Off
Off
Off
6 - 15