Usb Pc Or Macintosh ® Keyboard; Usb Hid; Usb Com Port Emulation - Honeywell 4800dr - Document Camera Barcode Manual

USB PC or Macintosh ® Keyboard
Scan one of the following codes to program the document reader for USB PC Keyboard or USB Macin-
tosh Keyboard. Scanning these codes adds a CR and selects the terminal ID (USB PC Keyboard - 124,
USB Macintosh Keyboard - 125).
USB Keyboard (PC)
USB Keyboard (Mac)
USB Japanese Keyboard (PC)

USB HID

Scan the following code to program the document reader for USB HID barcode readers. Scanning this
code changes the terminal ID to 131.
USB HID Barcode Reader

USB COM Port Emulation

Scan the following code to program the document reader to emulate a regular TTL-232-based COM
port. If you are using a Microsoft® Windows® PC, you will need to download a driver from the Honey-
well website (www.honeywell.com/aidc). The driver will use the next available COM port number.
Apple® Macintosh computers recognize the document reader as a USB CDC class device and automat-
ically use a class driver. Scanning the code below changes the terminal ID to 130.
USB COM Port Emulation
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
On
* Off
1 - 4