CHAPTER
8
UTILITIES
To Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the decoded
symbology. (See the
character code that identifies each symbology.) This action first clears all current
prefixes, then programs a Code I.D. prefix for all symbologies. This is a temporary
setting that will be removed when the unit is power cycled.
Show Software Revision
Scan the bar code below to output the current software revision, unit serial number,
and other product information for both the scan engine and base.
Show Data Format
Scan the bar code below to show current data format settings.
HF52X Fix Mount Barcode Scanner User Guide
Symbology Charts,
beginning on page 209) for the single
Add Code I.D. Prefix to
All Symbologies (Temporary)
Show Software Revision
Data Format Settings
8
171