Presentation Sensitivity; Hands Free Time-Out; Reread Delay - Honeywell 4800dr - Document Camera Barcode Manual

Presentation Sensitivity

Presentation Sensitivity is a numeric range that increases or decreases the document reader's reaction
time to barcode presentation. To set the sensitivity, scan the Sensitivity barcode, then scan the degree
of sensitivity (from 0-20) from the inside back cover, and Save. 0 is the most sensitive setting, and 20 is
the least sensitive. Default = 1.
Sensitivity

Hands Free Time-Out

The Scan Stand, and Presentation, and Streaming Presentation Modes are referred to as "hands free"
modes. If the document reader's trigger is pulled when using a hands free mode, the document reader
changes to manual trigger mode. You can set the time the document reader should remain in manual
trigger mode by setting the Hands Free Time-Out. Once the time-out value is reached, (if there have
been no further trigger pulls) the document reader reverts to the original hands free mode.
Scan the Hands Free Time-Out barcode, then scan the time-out duration (from 0-300,000 milliseconds)
from the inside back cover, and Save. Default = 5,000 ms.
Hands Free Time-Out

Reread Delay

This sets the time period before the document reader can read the same barcode a second time. Set-
ting a reread delay protects against accidental rereads of the same barcode. Longer delays are effective
in minimizing accidental rereads. Use shorter delays in applications where repetitive barcode scanning
is required. Default = Medium.
Reread Delay only works when in Presentation Mode or Hands Free Time-Out (page 3-5).
Short (500 ms)
* Medium (750 ms)
Long (1000 ms)
Extra Long (2000 ms)
3 - 5