Saving The Settings (Memory) - Pentax 16186 - Optio E80 Digital Camera Operating Manual

Saving the Settings (Memory)

The Memory function is for saving the current camera settings when the
camera is turned off.
For some camera settings, the Memory function is always set to O (On)
(the settings are saved when the camera is turned off), while for others
you can choose on or off (to choose whether the settings are saved or
not when the camera is turned off). The items which can be set to O (On)
or P (Off) in the Memory function are shown in the table below. (Items
not listed here are always saved in the selected settings when the
camera is turned off.)
If you select O (On), the settings will be saved in the status they were in
immediately before the camera was turned off. If you select P (Off), the
settings will be reset to the defaults when the camera is turned off. The
table below also shows whether the Memory default setting for each item
is on or off.
Item
Face Priority A Face Recognition mode set by using the I button.
Flash Mode The flash mode set with the four-way controller (4)
Drive Mode The drive mode set with the four-way controller (2)
Focus Mode The focus mode set with the four-way controller (5)
Zoom Position The zoom position set with the Zoom/w/x button
Sensitivity The [Sensitivity] setting on the [A Rec.Mode] menu
EV The [EV Compensation] setting on the
Compensation [A Rec.Mode] menu
The [Digital Zoom] setting on the [A Rec.Mode]
Digital Zoom
menu
The information display mode set with the
DISPLAY
4/W button
If a new SD Memory Card is inserted when On has
File No.
been selected, file numbers are assigned sequentially.
Description
3
Default
Page
Setting
p.61
P
p.84
O
p.78
P
p.79
p.86
P
p.67
P
p.90
P
p.89
P
p.69
O
p.18
P
—
O
97