Setting The Sensitivity - Pentax 16186 - Optio E80 Digital Camera Operating Manual

3
Use the four-way controller (45)
to select the EV value.
To brighten, select a positive (+) value. To
darken, select a negative (–) value.
You can choose the EV setting in the range
of –2.0 EV to +2.0 EV in 1/3 EV steps.
4
Press the 3 button.
The camera returns to capture status.
3
The EV compensation function cannot be used in 9 (Green) or b
(Auto Picture) mode.
Saving the EV Compensation value setting 1p.97

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.
Auto The sensitivity is automatically adjusted by the camera. (Sensitivity 100 - 800)
100
200
400
800
1600
3200
6400
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
90
The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.
Higher sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected by
noise.
Rec. Mode 1/2
Recorded Pixels 10
M
Focusing Area
Sensitivity
Auto
EV Compensation 0.0
Movie
Digital Zoom
Exit
MENU