Powering the Camera
Installing the Batteries
Install the batteries into the camera. Use two AA alkaline, AA lithium or
AA Ni-MH batteries.
1
Open the battery/card cover.
Slide the battery/card cover in the direction 1. The cover will
automatically open in the direction 2 when you release your fingers
from it.
2
Insert the batteries, making sure the (+) and (–)
terminals on the batteries match the (+) and (–) symbols
inside the battery compartment.
Make sure to check the direction of the batteries. If the battery is
incorrectly oriented, malfunction may result.
3
Close the battery/card cover and slide it in the opposite
direction of 1.
1
27