Changing The Video Output Format - Pentax 16186 - Optio E80 Digital Camera Operating Manual

Changing the Video Output Format

When you connect the camera to AV equipment, choose the appropriate
video output format (NTSC or PAL) for taking and playing back images.
1
Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Video Out].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select video output format.
Choose a video output format to match the
output format of the AV equipment.
5
Press the 4 button.
The setting is saved.
Depending on the country or region, images may fail to be played back
if the video output format is set different from the one in use there. If this
happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.118
Video output format of each city 1p.188
Setting
Video Out NTSC
Brightness Level PAL
5sec.
Power Saving
3min.
Auto Power Off
Reset
Delete all
MENU Cancel Cancel Cancel
2/3
6
OK OK OK OK
149