Adjusting The Brightness Of The Display; Using The Power Saving Function - Pentax 16186 - Optio E80 Digital Camera Operating Manual

Adjusting the Brightness of the Display

You can adjust the brightness of the display.
1
Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Brightness
Level].
3
Use the four-way controller (45)
to adjust the brightness.
F Dark
G Normal
H Bright
4
Press the 3 button.
6
The camera returns to A mode or Q mode.
The display appears with the set brightness.

Using the Power Saving Function

You can save battery power by setting the display to dim automatically
when no operation is performed for a fixed time. After the power saving
function has been activated, the display returns to the ordinary
brightness by pressing any of the buttons.
1
Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Power
Saving].
150
Setting
NTSC
Video Out
Brightness Level
5sec.
Power Saving
3min.
Auto Power Off
Reset
Delete all
MENU Exit Cancel Cancel
2/3