Sony MEX-100NV Installation Manual page 46

Einbauanl_CD5_0.book Seite 44 Montag, 1. Juli 2002 2:38 14
Installation guide
Status of calibration ride (
In the Service Mode, select
control and press to confirm.
The calibration status (e.g.
) are displayed. After completing calibration, the street in which you
are currently driving is displayed (provided that it is digitised) instead
of and .
Testing the system components (
A test program automatically tests the internal components of the navi-
gation system.
In the Service Mode, select
and press to confirm.
If is displayed, press NAVI. The unit switches back to the Service
Mode.
Function test of the GAL signal, reverse signal, internal sensors
( )
• In the Service Mode, select
and press to confirm.
• Move the vehicle several metres forwards or backwards for the
GAL signal function test.
The number after
speed).
The number after
pressing the accelerator when the vehicle is parked.
Subject to correction and technical modifications
)
using the SELECT
) and the type of positioning (e.g.
)
using the SELECT control
using the SELECT control
should increase (even at a low
should not increase if idling or
44
C A L I B R A T I O N R I
M O D U L E T E S T
S E N S O R S
Copyright by Becker GmbH, D-76303 Karlsbad