Sony MEX-100NV Installation Manual page 44

Einbauanl_CD5_0.book Seite 42 Montag, 1. Juli 2002 2:38 14
Installation guide
Unit rotation corresponds to horizontal rotation. A positive
value means rotation of the front of the unit towards the
driver (LHD).
The unit inclination can now be selected in degrees by turning the SE-
LECT control and pressing to confirm.
Unit inclination corresponds to vertical inclination. A posi-
tive value means upward inclination of the front of the unit.
The number of wheel impulses per wheel revolution (if known) can then
be selected by turning the SELECT control and pressing to confirm.
If the number of wheel impulses per wheel revolution is not
known,
to enter tyre data.
The previously entered data is displayed once more. If the data entered
is correct, press the SELECT control.
If correction is necessary, select
trol and press to confirm. The values can then be re-entered.
Once the previously entered data has been confirmed, the tyre data can
be entered or self-calibration can be started.
To enter the tyre data, select
LECT control and press to confirm.
Subject to correction and technical modifications
must be selected. It is then not possible
by turning the SELECT con-
by turning the SE-
42
0
UNKNOWN
T U R N : 0 I N C L : 2 5 I M P : 4 8
S T A R T S E L F - C A L I B R A T I O N
Copyright by Becker GmbH, D-76303 Karlsbad