Sony MEX-100NV Installation Manual page 37

Einbauanl_CD5_0.book Seite 35 Montag, 1. Juli 2002 2:38 14
• Engage the reverse gear for the reverse signal function test.
The arrows under
engaging the reverse gear.
• When using the GPS for the first time, the vehicle must be parked
outdoors, while ensuring that it has a clear view in all directions
(not in the immediate vicinity of buildings).
Information on the GPS reception is given in the right-hand part of
the display.
Four different messages may appear:
- : GPS reception is already available.
- : It is necessary to wait for GPS reception. You must
wait until
-
nected.
-
the hotline.
You must wait until
(or a higher value) is displayed.
This procedure (first reception of the necessary GPS data)
may take a few minutes. The unit must remain switched on
for the entire duration of this procedure. The vehicle must
not be moved. If after 5 minutes there has been no change
in the values, the parked position (clear view in all direc-
tions as far as possible) or the installation location of the
Subject to correction and technical modifications
must change direction on
is displayed.
: The GPS antenna is not properly con-
: If this message is displayed, please contact
, (or ) and
35
Installation guide
Speed Direction
0 0 0
Speed Direction
0 1 2
Speed Direction
0 1 2
Speed Direction
0 1 2
Speed Direction
0 1 2
Copyright by Becker GmbH, D-76303 Karlsbad