Protrudent/Bumpy Paper; Adjusting Color Registration; Performing Auto Correct - Epson Aculaser C1700 Series User Manual

Protrudent/Bumpy Paper

Problem
Printed surface got protrudent/bumpy.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.

Adjusting Color Registration

This section describes how to adjust the color registration when you first install the printer or after
moving it to a new location.

Performing Auto Correct

Auto Correct allows you to correct the color registration automatically.
The Printer Setting Utility
The following procedure uses Microsoft
1. Click start — All Programs — EPSON — EPSON Printer Software — EPSON AL-C1700 —
Printer Setting Utility.
Action
Clean up the fusing unit.
1. Load one sheet of paper on the MPF, and then print a solid image all over paper.
2. Load the printed sheet with the side to be printed on facing down, and then print
a blank sheet of paper.
® ®
Windows XP as an example.
Epson AcuLaser C1700 Series
Troubleshooting
User's Guide
93