Changing Remote Fax Options; Turning Off Remote Fax Options - Brother IntelliFax-2840 Advanced User's Manual

Chapter 4
Changing Remote Fax
Options
If received faxes are left in your machine's
memory when you change to another
Remote Fax Option, the LCD will ask you the
following message:
Erase All Fax?
1.Yes 2.No
or
Print All Fax?
1.Yes 2.No
 If you press 1, faxes in the memory will be
erased or printed before the setting
changes. If a backup copy has already
been printed it will not be printed again.
 If you press 2, faxes in the memory will not
be erased or printed and the setting will be
unchanged.
(For MFC-7240)
If received faxes are left in the machine's
memory when you change to PC Fax
Receive from another remote fax option
(Fax Forward, Paging or Fax
Storage), the LCD will ask you the
following question:
Send Fax to PC?
1.Yes 2.No
 If you press 1, faxes in the memory will be
sent to your PC before the setting
changes. Faxes in the memory will be sent
to your PC when the PC-Fax Receive icon
is active on your PC. (See Software User's
Guide.)
If you press 2, faxes in the memory will not

be erased or transferred to your PC and
the setting will be unchanged.
The LCD will show the following option:
Backup Print
On
Press a or b to choose On or Off.
24
Press OK.
Press Stop/Exit.
4
Important
If you choose Backup Print On, the
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case if there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
(FAX-2840 and MFC-7240)
If there is a power failure, the faxes stored
in the machine's memory will be deleted.

Turning off Remote Fax Options

a
Press Menu, 2, 5, 1.
Remote Fax Opt
1.Fwd/Page/Store
b
Press a or b to choose Off.
Press OK.
Note
The LCD will give you options if there are
received faxes still in your machine's
memory. (See Changing Remote Fax
Options uu page 24.)
c
Press Stop/Exit.
4