Table of Contents
Advertisement
80
EN
Output/Input Set
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
TV
TV/
MUTING
VIDEO
ABC
GHI
JKL
PQRS
TUV
CANCEL
G-CODE
PROG/CHECK
SHOW VIEW
TOP MENU
rtwe
ENTER
MENU
PREVIOUS
SLOW
PLAY/SELECT
REC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
SET UP
L-1 Output and L-1 Input Setting
(L-1 OUTPUT and L-1 INPUT)
The L-1 IN/OUT connector accepts and delivers either a
composite signal (regular video signal) or a Y/C signal (a signal
in which the luminance and chrominance signals are separated).
Set "L-1 OUTPUT" and "L-1 INPUT" to the appropriate mode
depending on the type of appliance connected to the unit's L-1
IN/OUT connector.
NOTES:
When you connect the unit using the provided cable adapter,
be sure to set "L-1 OUTPUT" to "SCART VIDEO". If "L-1
OUTPUT" is set to "SCART S-VIDEO" or "SCART RGB", the
image may be distorted.
When using the provided output cable adapter, L-1 IN/OUT
connector can be used only as an output connector.
Component video signals are not output from the L-1 IN/OUT
connector.
When Progressive scan mode is engaged, it is not possible to
select the setting of "L-1 OUTPUT". (
A
Access the Main Menu screen.
Press SET UP.
TV
DVD
TV
STANDBY/ON
TV
DVD
TV VOLUME
DEF
MNO
CH
WXYZ
AUX
MEMO/MARK
REC LINK
TIMER
NAVIGATION
ENTER
RETURN
NEXT
SLOW
STOP/
CLEAR
PAUSE
OPEN/
CLOSE
pg. 99)
B
Access the Output/Input Set screen.
A Press w e to move the
arrow to"FUNCTION SET
UP", then press ENTER.
B Press w e to move the
arrow to "VIDEO IN/
OUT", then press ENTER.
DVD
C
Select the output or input mode for the L-1
IN/OUT connector.
A Press rt to move the
arrow to "L-1 OUTPUT"
or "L-1 INPUT", then
press ENTER.
B Press rt to select the
appropriate setting, then
press ENTER.
(The boldface settings in the table below indicate the settings at
your purchase.)
8 L-1 OUTPUT
SCART VIDEO:
SCART S-VIDEO*: If a connected appliance's input
SCART RGB*:
COMPONENT:
8 L-1 INPUT
VIDEO:
S-VIDEO*:
* These settings are not correctly operative when using the
provided cable adapter.
EDITING (cont.)
If a connected appliance's input
is compatible only with regular
video signals, set to "SCART
VIDEO".
is compatible with Y/C signals,
set to "SCART S-VIDEO". (For
connection, be sure to use a 21-
pin SCART cable that is
compatible with the Y/C signal.)
If a connected appliance's input
is compatible with RGB signals,
set to "SCART RGB".
If a connected appliance's input
is compatible with Y/P
/P
B
signals, set to "COMPONENT".
You can obtain a high-quality Y/
P
/P
picture. Switch the TV to
B
R
the input that you can watch
component video pictures.
If a connected appliance's output
is compatible only with regular
video signals, set to "VIDEO".
If a connected appliance's
output is compatible with Y/C
signals, set to "S-VIDEO". (For
connection, be sure to use a 21-
pin SCART cable that is
compatible with the Y/C signal.)
R
Advertisement
Table of Contents
