Specifications - JVC DRM10S Instructions Manual

SPECIFICATIONS

GENERAL
Power requirement*
DR-M10SAG/SAX : AC 110 V – 240 V
DR-M10SAA2 : AC 220 V – 240 V
Power consumption
Power on : 33 W
Power off : 17.6 W
Temperature
Operating : 5°C to 40°C
Storage : –20°C to 60°C
Operating position : Horizontal only
Dimensions (WxHxD)
: 435 mm x 70 mm x 350 mm
Weight : 4.3 kg
VIDEO/AUDIO
Recordable disc : DVD-RAM 12 cm (4.7 GB/9.4 GB)
DVD-RAM 8 cm (1.4 GB/2.8 GB)
DVD-R (12 cm: 4.7 GB, 8 cm: 1.4
GB for General Ver. 2.0)
DVD-RW (4.7 GB for Ver. 1.0/1.1)
Recording format
DVD-RAM : DVD Video Recording format
DVD-R : DVD-Video format
DVD-RW : DVD-Video format, DVD Video
Recording format
Recording time
Maximum 8 hours (with 4.7 GB disc)
(XP) : Approx. 1 hour
(SP) : Approx. 2 hours
(LP) : Approx. 4 hours
(EP) : Approx. 6 hours
(FR) : Approx. 1 hour – 8 hours
Playable disc : DVD-RAM 12 cm (4.7 GB/9.4 GB)
DVD-RAM 8 cm (1.4 GB/2.8 GB)
DVD-R (12 cm: 4.7 GB, 8 cm: 1.4
GB for General Ver. 2.0)
DVD VIDEO, DVD-RW (4.7 GB)
Music CD (CD-DA)
Video CD
Super Video CD (SVCD)
CD-R/RW (CD-DA, Video CD/
SVCD formatted discs)
Audio recording system
: Dolby Digital (2 ch)
Linear PCM (XP mode only)
Video recording compression system
: MPEG2 (CBR/VBR)
,
d
50 Hz/60 Hz
,
d
50 Hz/60 Hz
Input/Output
S-video input
Y : 0.8 – 1.2 Vp-p, 75 ohms
C : 0.2 – 0.4 Vp-p, 75 ohms
S-video output
Y : 1.0 Vp-p, 75 ohms
C : 0.3 Vp-p, 75 ohms
Video input : 0.5 – 2.0 Vp-p, 75 ohms (pin jack)
Video output : 1.0 Vp-p, 75 ohms (pin jack)
Audio input : –8 dB, 50 kilohms (pin jack)
Corresponding to mono (left)
Audio output : –8 dB, 1 kilohms (pin jack)
i.Link : 4-pin for DV input
Component video output
Y : 1.0 Vp-p, 75 ohms
P /P : 0.7 Vp-p, 75 ohms
B R
Corresponding to copy protection
Optical : –18 dBm, 660 nm
Coaxial : 0.5 Vp-p, 75 ohms
Corresponding to Dolby Digital and
DTS Digital Surround
Bit stream
Selectable in digital audio output
setting menu
TUNER/TIMER
Signal system : PAL-type colour signal and CCIR
monochrome signal, 625 lines 50
fields
TV channel storage capacity
: 99 positions (+AUX position)
Tuning system : Frequency synthesized tuner
Channel coverage
VHF : (low) 42 MHz – 175 MHz/
(high) 175 MHz – 470 MHz
UHF channels : 470 MHz – 870 MHz
Memory backup time
: Approx. 60 min.
ACCESSORIES
Provided accessories
: RF cable,
Audio/video cable,
Infrared remote control unit,
Input Cable Adapter,
Output Cable Adapter,
Conversion Plug
(DR-M10SAG/SAX only)*,
"R6" battery x 2
* The model number depends on the country where you live.
Check the label on the rear of the unit.
Specifications shown are for SP mode unless otherwise
specified.
E.& O.E. Design and specifications subject to change without
notice.
105
EN