Edit To Or From Another Recorder - JVC DRM10S Instructions Manual

Edit To Or From
Another Recorder
Player
TV
Recorder
Recorder
Output cable adapter
(provided)
TV
Player
Your unit
Output cable adapter
(provided)
Audio/video cable
(provided)
Another recorder
Your unit
Input cable
adapter
(provided)
Audio/video cable
(provided)
Another recorder
You can use your unit as the source player or as the
recording deck.
Slide the TV/DVD switch to DVD.
A
Make connections.
A When using your unit as the source player:
— connect its L-1 IN/OUT connector to the recording
deck via output cable adapter.
B When using your unit as the recording deck:
— connect its L-2 IN connector to the source player
via input cable adapter.
B
Set the input mode of recording deck.
With this unit, press CH +/– to select "L-2".
When using another recorder as the recording deck, refer to its
instruction manual.
When using the L-2 IN connector, set "L-2 SELECT" to
"VIDEO". ( pg. 81, "L-2 Select Setting (L-2 SELECT)")
C
Set the recording speed.
Press REC MODE repeatedly until the desired recording
speed appears.
D
Start the source player.
Engage the Play mode of the source player.
E
Start the recording deck.
Engage the Record mode of the recording deck.
F
Stop dubbing.
Stop recording on the recording deck, then stop playback
on the source player.
NOTES:
All necessary cables can be obtained from your dealer.
When you use this unit as the source player for editing, be sure
to set "SUPERIMPOSE" to "OFF" before starting. (
If you are using another recorder with S-Video and Audio
output connectors, connect its S-Video and Audio output
connectors to this unit's S-VIDEO and AUDIO input
connectors on the front panel. Then, set the unit's input mode
to "F-1" in step B, and set "F-1 INPUT" to "S-VIDEO".
( pg. 81, "F-1 Input Setting (F-1 INPUT)")
79
EN
pg. 90)