Message Alert Tone - AT&T CL82309 - DECT 6.0 User Manual

Handset settings
Answering system settings

Message alert tone

When the message alert tone is set to ON, and there is at least one new
message, the telephone base beeps every 10 seconds. Unless you change it,
the message alert tone is set to off.
There is no audible alert at the handset.
To change the setting:
1. When the handset is in idle mode, press MENU/
to enter the main menu.
2. Press /SELECT again.
MENU
3. Press CID or DIR
then press
MENU
4. Press CID or DIR
then press
MENU
5. Press CID or DIR
6. Press /SELECT to confirm your setting and you
MENU
hear a confirmation tone.
NOTES:
1. The message alert tone beeps only if all the conditions below
are met:
- Answering system is on.
- Message alert tone setting is on.
- There are new messages.
2. To temporarily turn off the message alert tone, see page 40.
to scroll to >ANS SYS SETUP,
/SELECT.
to scroll to >MSG ALERT TONE,
/SELECT.
to choose between ON and OFF.
SELECT
19
?BOT/!TZTUFN
EJSFDUPSZ
?BOT!TZT!TFUVQ
QMBZ!NTHT
?NTH!BMFSU!UPOF
BOT!PO0PGG
NTH!BMFSU!UPOF
PO