Base Message Counter Displays - AT&T CL82309 - DECT 6.0 User Manual

Answering system

Base message counter displays

The base message counter shows the total number of answering system
messages. See the table below for other message counter displays.
Message counter displays
1
1 (flashing)
2.::!
2.:: (flashing)
21.::
2.:: (counting)
:: (flashing)
2.::! !G
&
(alternating)
. .
1.7
No messages.
You need to set the clock (page 12).
Total number of old messages and memos, or message number currently
playing.
Total number of messages and memos. The number flashes when there
are new (unreviewed) messages.
After a power failure, the number in the message counter flashes to
indicate that you need to set the clock.
Current remote access code while setting (page 18).
Elapsed time while recording a memo (page 43) or announcement up to
90 seconds (page 16).
A memo recording is longer than 99 seconds.
Memory is full. You must delete some messages before recording new
messages.
The system is answering a call, or someone is trying to reach it remotely.
Shows for two seconds while adjusting the telephone base speaker
volume.
44