Options While On Calls; Chain Dialing - AT&T CL82309 - DECT 6.0 User Manual

Telephone operation

Options while on calls

Chain dialing

Use this feature to initiate a dialing sequence from the numbers in the
directory, caller ID history, or redial memory while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account information or access codes) from the directory, caller ID history, or
redial list.
To access the directory while on a call:
1. Press MENU/
2. Press CID or DIR
3. Press CID or DIR
4. Press /SELECT to dial the number shown.
MENU
To access the caller ID history (call log) while on a call:
1. Press /SELECT.
MENU
2. Press CID or DIR
3. Press CID or DIR
4. Press /SELECT to dial the number shown.
MENU
To access the last number redial while on a call:
Press REDIAL/
PAUSE
you press REDIAL/
the number.
NOTES:
1. You cannot edit a directory entry while on a call. For more details about the
directory, see page 28.
2. You cannot copy a caller ID entry into the directory while on a call. For more details
about the caller ID history, see page 33.
3. If you press REDIAL/
and you cannot erase the entry. For more details about the redial memory, see page
21.
4. Press and hold
call.
.
SELECT
to scroll to >DIRECTORY, then press
to scroll to the desired number.
to scroll to >CALL LOG, then press
to scroll to the desired number.
to show and dial the most recently dialed number. If
again within two seconds, the system does not dial
PAUSE
while on a call, you can only view the most recent call,
PAUSE
OFF/
CLEAR
to exit redial, directory or caller ID history when on a
23
/SELECT.
MENU
/SELECT.
MENU