Installing Internal Drives - IBM 9228 - IntelliStation Z - Pro User Manual

12. If you have installed a full-length adapter, press the blue dot on the top
If you have other options to install, do so now; otherwise, replace the side cover
(see "Replacing the side cover" on page 59).

Installing internal drives

Depending on the computer model, one or more of the following drives might be
installed in the computer:
v Hard disk drive
v CD-RW or DVD/CD-RW combo
v CD-ROM
v DVD-ROM
v Multi-burner Plus
v Diskette drive (optional)
Bay 1
Bay 2
Bay 3
Bay 4
Bay 5
Bay 6
Bay 7
The following notes describe the types of drives that the computer supports and
other information that you must consider when installing drives:
v The computer comes with an IDE optical drive in bay 1 and four simple-swap
v Diskette drives, tape drives, CD-RW, DVD/CD-RW, and DVD-ROM drives are
42
IBM IntelliStation Z Pro Type 9228: User's Guide
retention tab, which is located on the side of the front adapter-retention bracket
that faces the fan compartment. When you press the top retention tab, the
adapter locks in place.
Note: If any adapter in the computer is large or has heavy cables attached to
it, you can secure the adapter with a screw. Insert one backup
expansion-slot screw through the top of each adapter bracket into the
screw hole and secure the adapter before proceeding to the next step.
hard disk drive bays. A hard disk drive is installed in bay 4.
examples of removable-media drives. You can install removable-media drives in
bays 1, 2, and 3 only.