Printing A Configuration Test Print - Xerox 850DX - Phaser Color Solid Ink Printer User Manual

Printing a Configuration Test Print

Ÿ
To check the communication settings of the printer, print a
CONFIGURATION Test Print from your printer user interface, or from the
Web PMT by selecting Printer Defaults> Test Print> Minimal button.
Your test print data will reflect your installed hardware, installed feature
keys, and AccXES firmware version.
Ÿ
Accessing the Accounting feature requires a Job Accounting license. A
Scan to Net license is needed to scan documents to the network and to
retrieve them using the Document Retrieve Tool. Both Accounting and
Scan to Net need to be enabled on the printer. A Color feature key license
is needed for scanning colored images.
Ÿ
See the left top area of the test print to locate the AccXES firmware
version that the printer is using. This version will also show in the Printer
Identification section of the Device Manager Tab.
AccXES Client Tools User Guide 17